SPECIFICATIONS

Bicycle pump: Mini scuba tank

Brand Name: SCORKLER

Certification: CE

Diving: diving accessories

Diving glasses: diving snorkel

Full Face Snorkel Mask: swimming

High-concerned chemical: None

Origin: China Mainland

Portable Travel Diving Kit: Durable Oxygen Tank Kits

Professional Diving Equipment: oxygen cylinder for diving

air pump: diving mask

boat repair: diving equipment

lung tank diving: Scuba Tank Set

oxygen tank: underwater breathing

water sport: outdoor travelling

Welcome to our store.

This diving equipment package includes:

1x SCORKLER 0.5L diving cylinder (with mouth valve)

1x Black snorkel mask (two tubes)

1x Connector

1x Manual pump

Here is a description of each item

• About 0.5L diving cylinders and accessories

【5-10mins Underwater Experience】SCORKLER mini scuba tank has 0.5L capacity. This diving equipment is a D.5L capacitycylinder, Typically supports approximately 35 breaths at depths up to 5 meters underwater (200 bar pressure). but the specific use timeis affected bq a variety of factors,such as breathing frequency, divingdepth, physical strength and skilllevel of the diver and watertemperature. Therefore, theremay be a sudden decrease in theuse time, to ensure diving safety,it is recommended to keep an eyeon the pressure gauge changes.

【Portable Design】SCORKLER mini scuba tank is only 1.5kg when it is empty. Compared to the traditional oxygen cylinders, SCORKLER scuba tank is smaller and lighter, so you can carry it easily. You can take it in your luggage for airplane journeys. What’s more, there is no skill requirement to an amateur.

【Various Inflation modes】The 8mm one-way inflation valve of scuba diving tank can connect the refill adapter to fill up. Usually, you can use a bigger bottle to guide vials. Also, you can use the high-pressure hand pump or electronic pump. The former one takes about 25-30 minutes, the electronic one takes about 8-10 minutes. In addition, if there is a diving store, you can ask for help.

【Quality Guarantee】The whole bottle of scuba tank is made of 6061 aviation aluminum, with 4mm thickness, which is more Anti-oxidation and anti-corrosion. The working pressure is no more than 3000PSI/200bar/20Mpa. Once the inside pressure exceeds the safety value, the explosion-proof copper sheet will burst to reduce pressure. Don’t worry about explosion. Our products have passed DOT certification.

• About the K2 Snorkeling Mask

【Support Both Diving & Snorkeling】Tip: This snorkeling mask is size L/XL!

You can both connect with two snorkels for snorkeling and connect with scuba tanks for scuba diving( only support to connect with 0.5L / 0.7L mini scuba tanks, need the K2 connector). When used for snorkeling, it acts as an full face diving mask that support breathe through nose, which making scuba diving as easy as snorkeling (Note: when use for scuba diving, the maximum dive depth should not exceed 10m)

【180° Panoramic View & Less-fog &Anti-leak. 】

Adopts transparent flat lenses that do not distort your view underwater, make it easier to get a 180° panoramic view and allow you to fully immerse the underwater world. The front exhaust valve can quickly release air, the skirt and chamber of the mask are made of silicone material and closely fits your skin, which can greatly reduces fogging. Moreover, the diving mask has a drain valve can drain water

【Humanized Design. 】

Both breathing tubes of the mask can be roated and removed. When used for diving, we only need to replace the snorkel with K2 connector, and then the mini scuba tank can be connected to the mask, you can also get multi scuba tank for spares. Moreover, it equipped with a camera mount to facilitate recording of diving trips

【High Quality.】

The mask is made of ABS+PC materials, with a barrier added between the nasal cavity and the mirror surface. The exhaust valve is set in the nasal cavity, which effectively reduces the flow of exhaust gas inside the mask, thereby achieving a better anti-fog effect. There is a drain valve at the bottom. If water accidentally enters the mask, it will be drained out quickly under the action of atmospheric pressure

All items require simple assembly and operation in strict accordance with the instructions.

a mini high-pressure hand inflator pump and other accessories (you need to simply assemble and follow the operating instructions to inflate)

Description of use

This mini high pressure hand pump is widely used, mainly for diving cylinder inflation, in addition, can also be used as bicycle and air gun inflation. (Tips, the number of presses to inflate different objects varies, which is physically tiring, so it is recommended as a backup inflatable device)

For example: for 0.5L diving cylinders, the number of presses is about 600, and it takes about half an hour.

Tips: the use of the process need to strictly follow the instructions